What Makes the Clydesdale Edition LiFePO4 36V 15Ah E-Bike Battery Unique?
The Clydesdale Edition LiFePO4 36V 15Ah electric bike battery combines high-capacity lithium iron phosphate (LiFePO4) technology with rugged durability for heavy-duty e-bikes. Designed for long-range performance, it offers 1,500+ charge cycles, enhanced thermal stability, and compatibility with cargo/utility bikes. Its weather-resistant casing and smart BMS ensure safety and reliability under demanding conditions.
How Does LiFePO4 Chemistry Improve E-Bike Battery Performance?
LiFePO4 (lithium iron phosphate) batteries outperform traditional lithium-ion in safety, lifespan, and thermal stability. They operate efficiently in -20°C to 60°C ranges, resist thermal runaway, and retain 80% capacity after 2,000 cycles. The Clydesdale Edition uses prismatic LiFePO4 cells for compact energy density (15Ah) while minimizing voltage sag during high-current draws.
LiFePO4’s crystalline structure provides inherent stability, reducing combustion risks compared to cobalt-based batteries. This chemistry maintains consistent voltage output even at low charge states, preventing the “power drop” effect common in NMC batteries. Engineers at Redway Power optimized cell spacing in the Clydesdale Edition to enhance heat dissipation during 35A continuous discharges – critical for climbing steep grades with heavy loads. Third-party testing shows 12% less capacity loss than industry averages after 500 cycles when operated at 45°C ambient temperatures.
Why Choose a 36V 15Ah Configuration for Heavy-Duty E-Bikes?
A 36V 15Ah battery delivers 540Wh of energy, ideal for cargo bikes or riders needing 40-60 miles per charge. The voltage balances torque and speed for mid-drive/hub motors, while the 15Ah capacity supports sustained power delivery. This configuration is optimal for loads up to 400 lbs, making it a fit for Clydesdale bikes used in delivery or touring.
| Load Capacity | Range (ECO Mode) | Range (Turbo Mode) |
|---|---|---|
| 250 lbs | 55-60 miles | 38-42 miles |
| 400 lbs | 42-48 miles | 26-30 miles |
What Safety Features Are Integrated into the Clydesdale Edition?
The battery includes a multi-layer BMS with overcharge/discharge protection, short-circuit prevention, and cell balancing. Its IP65-rated aluminum casing shields against water, dust, and impacts. Temperature sensors and flame-retardant materials further mitigate risks, meeting UL 2271 and UN38.3 certifications for transport safety.
How Does the Clydesdale Edition Optimize Charging Efficiency?
With a 5A fast charger, the battery reaches 100% in 3 hours. The BMS enforces CC-CV charging to prevent cell stress, extending lifespan. Users can enable partial charging (e.g., 80%) via the LCD interface to reduce wear. Reverse polarity protection and auto-shutoff at 42V ensure safe charging cycles.
Which E-Bike Models Are Compatible with This Battery?
The Clydesdale Edition fits standard 36V mid-drive/hub motor systems, including RadPower Bikes, Trek Fetch+, and Yuba Supercargo. Its universal mounting bracket adapts to Bosch, Shimano, and Bafang interfaces. Voltage and connector compatibility should be verified using the manufacturer’s compatibility chart.
What Maintenance Practices Extend the Battery’s Lifespan?
Store the battery at 40-60% charge in 10°C-25°C environments when unused. Avoid deep discharges below 20%; recharge within 24 hours after use. Clean terminals monthly with isopropyl alcohol and inspect casing seals biannually. Calibrate the BMS by fully discharging/charging every 50 cycles.
For winter storage, maintain charge levels above 30% to prevent irreversible sulfation. Use dielectric grease on connectors in coastal areas to combat salt corrosion. The Clydesdale Edition’s modular design allows individual cell replacement – a cost-effective solution compared to replacing entire battery packs. Field data shows proper maintenance can extend cycle life by 18-22% compared to neglected units.
How Does the Clydesdale Edition Compare to NMC Batteries?
Unlike NMC (nickel manganese cobalt) batteries, the Clydesdale’s LiFePO4 cells have lower energy density but superior cycle life (3x longer). It trades slight weight penalties (4.2kg vs 3.5kg) for fire resistance and stable performance in extreme temperatures, making it safer for commercial/industrial applications.
“The Clydesdale Edition’s LiFePO4 chemistry is a game-changer for high-demand e-bike users. We’ve tested it delivering consistent 35A peak currents without degradation—critical for cargo bikes tackling steep gradients. Its modular design also allows swapping individual cells, reducing long-term ownership costs.”
— Redway Power Systems Engineer
FAQs
- Can this battery power a 750W motor?
- Yes, its 35A continuous discharge supports 36V×35A=1,260W peak output, suitable for 750W motors.
- Is a battery management system (BMS) included?
- Yes, a 16-layer BMS with Bluetooth diagnostics comes pre-installed.
- What’s the warranty period?
- 3 years against defects, prorated after 18 months. Excludes water damage from submersion.